Back to top
Send SMS    Call Me Free

10 channel Sequential Timer

10 channel Sequential Timer
10 channel Sequential Timer
Send Inquiry
Product Code : 532
Product Description


Model code:1010
Product Name:10 channel Sequential Timer
Sub Category:sequential_timers




 0.56” 7 Segment Red LED 4 digit display for time

0.56” 7 Segment Red LED single digit display for active channel

10 Red LEDs for indication of current channel relay On

3 LEDs to indicate the resolution of the timing of the current channel

2 LEDs to indicate On or Off cycle of a channel

 Timer Display  2 + 2 Digits
 Range Selectable (for each channel)    

 99.99 Secs

99Mins 59 Secs

99 Hrs 59 Mins

 5 sets of Contacts

 ·   Marked “A” to “E

“A”: If contacts are shorted, timer recycles/re-starts at end of sequence. If contacts are open only single sequence operation present

“B”: Cascading input, Used for trigger start on momentary closing of contact OR To cascade 2 such timers, connect “E” contacts of first timer to “B” contacts of next timer

“C”: If contacts are open the timer resets to channel 0 and time 0 on power on. If contacts are shorted, the timer resumes operation from where it left off at power failure (same channel and same time)

“D”: Inhibit/Hold: If contacts are shorted, the timer operation freezes. If opened, it resumes.

“E”: Cascading output: Used as input from previous timer to cascade more than one instrument

 Number of Relays  Up to 10 relays. Undesired channels can be skipped by setting the On and Off time of that channel to zero
 Relay Outputs  Potential free NO-P contacts of relays with 5 Amps/220V AC rating
 Memory  Solid state EEPROM for saving of timing settings. No battery required.
 Mounting  Wall mounting with rear clamp (optional)
 Supply   220V AC ±15% @ 50/60Hz
 Size  160mm x 170mm x 60mm