Product Description
Model 7210 Digital Humidity/Temperature Controller
Features:
- Direct, accurate display of Humidity and Temperature
- Uses the classical Dry/Wet temperature sensing technique
- Sensors are sealed Platinum PT100 type in S.S. immune to atmosphere gases etc.
- No need of any look-up table as the embedded software accesses the table from the micro controller memory.
- A sturdy sensor body has in-built water reservoir with facility to connect a water-drip to ensure the wick never dries up.
Specifications:
- Display : 2 Digits 0.56 RED 7 Segment LED for Humidity.
3 Digits 0.56 RED 7 Segment LED for Temperature
- Display Range : 0-99% for Relative Humidity and 0-99.9 C for Temperature
- Resolution : 1% for Relative Humidity and 0.1 C for Temperature
- Control Range : 0 to 99% for Humidity (over temperature range 0 to 65 C) and 0 to 99.9 C temperature
- Accuracy : 2% 1 Least Significant Digit for Humidity.
- 0.2 C 1 Least Significant Digit for Temperature
- Settings : By front panel membrane touch switches.
- Control Output : Humidifier ON for RH < SET HUMID 1%
De-humidifier ON for RH > SET HUMID + 1%
Heater ON for Temp. < SET TEMP 0.5%
Cooler ON for Temp. > SET TEMP + 0.5 C
- Control Relays : 4 sets of NO-P-NC of 5A/220V AC contact rating
- Power Supply : 230V AC 15% at 50/60Hz
- P.C. Interface : RS-232 output available on extra cost.
- Mounting Type : Panel Type
- Front Facia : 96mm x 96mm
- Weight : 1.2 Kgs.
- 4 Control outputs for Humidifier, De-humidifier, heater and cooler.