Ampere Hour Meters

Being a client centric organization, we are offering a huge array of Ampere Hour Meters. These are fabricated with a premium quality of tools. These meters are able to measure the instantaneous current and integrate the current over time through it smoothly flows. Moreover, provided meters are used to measure electricity usage in a home. Ampere Hour Meters are known as a measuring device which is used to monitor the charging AH and the discharging AH of the battery. These are also able to provide a simple and cost effective method of tracking current.

Get a Price/Quote

Programmable Amp Hour Meter

Request To Call Back

Product Details:

Model code:800AH
Product Name:Programmable Amp Hour Meter
Category:ampere_hour_meters
Sub Category:battery_testing_application

Features

Current Integrated Display
4 DIG AMP-HOUR (Selectable: AH , 0.1 AH, AMin & 0.1 AMin)
Presetable Limit for Amp-Hour with Relay Out
6 Digit Totalizer AH Stored in EEPROM & Front Resettable
Displays Current in Amps
Lockable Scale Factor -CAL- for Various Shunts
Signal Input in mV from Current Shunt of 75mV/Amp
Application in Constant Thickness Electroplating which is Proportional to Preset AH Limit, irrespective of Voltage/ Current Variation.
Simultaneous Input for mV(from Current Shunt) and Battery Voltage, to measure the AH of a chargeable Battery when Voltage falls to Factory-Settable Limit( usually 10.5V for 12V Batt)

Specification

Display	6 RED 7 Segment LEDs of 0.56 character height.
Current Display	Max 9999 Amps using a shunt of current/75mV. User programmed
Amp-Hour	Max 9999 A-H for each preset cycle. (Amp-Hour range is selected by shorting Pin 17-18 at the rear)
Amp-Minute	Max 9999 A-Min for each preset cycle. (Amp-Minute is selected, opening the link between Pin 17 & 18).
Max shunt	Max value of 9999 Amp corresponding to 75mV
Totaliser	6 Digits for Amp-Hour or Amp-Min. i.e. 99,99,99. (readable for 10 sec by going into total mode).
Limit	Up to 9999 AH or Amin. setting (In limit mode using incr./ decr. switches).
Relay Contact	One NO-P-NC of 5 Amp rating.
Trigger start	By pressing front panel switch or closing a rear external contact.
Battery Back-Up	Not required. Programmed values & readings, including A-H stored in EPROM.
Lock	Electronic lock for calibration (open link between Pin 1 & 2 to lock CAL)
Low Volt. Trigger	Set at 10.5V internally. For testing 12V Battery AH. (With Pin 3 & 4 shorted).
Increased Res.	0.1AH or 0.1AMin facility by shifting internal jumper.
Supply	220V AC 10%
Size	Front Fascia 96mm x 96mm Din Size. Depth 135mm. Cut Out : 91mm x 91mm.
Weight	800 grams

Ampere Hour Meter with dual time relays

Product Details:

Model code:804AH
Product Name:Ampere Hour Meter with dual time relays
Category:ampere_hour_meters
Sub Category:electroplating_applications

Specification

Display	4 Digit 7 Segment Red LED display for Instantaneous Current 6 Digit 7 Segment Red LED display for Ampere-Hours/Mins 2 Red LEDs to indicate status of the 2 Relay contacts
Max. Shunt	Maximum 9999 Amps corresponding to 75mV settable
Calibration	from front panel
Set Point	Settable from 0-999999
Resolution	1AH/0.1AH/1AM/0.1AM
Totaliser	6 Digits for Ampere-Hour or Ampere-Minutes
Time Relays	2 relay contacts with individual time settings in Mins:Secs for timed dual dosing after the Ampere-Hour limit is reached
Contact Rating	NO-P-NC @ 5Amps/220V AC
Memory	Settings and Ampere-Hours saved in solid state EEPROM
Lock	Non-volatile EEPROM solid state memory Stores programmed value of shunt, preset value, current Amp-Hr and the current Cumulative Amp-Hr to preserve current status on power failure
Lock	By rear jumper to prevent accidental tampering with settings
Supply	220V AC @10% @ 50/60Hz 220V AC 10% at 50/60Hz Front Fascia 96mm x 99mm
Size	Depth 135mm. Cut Out : 91mm x 91mm
Weight	800 grams

Ampere Hour Meter with Charge Discharge

Product Details:

Model code:808AH
Product Name:Ampere Hour Meter with Charge Discharge
Category:ampere_hour_meters
Sub Category:battery_testing_application

Specification

Display	4 Digit 7 Segment Red LED display for Charging Ampere Hours 4 Digit 7 Segment Red LED display for Ampere-Hours
Shunt Calibration	Maximum 9999 Amps corresponding to 75mV settable from front panel
Discharge Set Point	Settable from 0-9999
Resolution	1AH/0.1AH
Relay	In alarm mode for Discharge Ampere Hours
Contact Rating	NO-P-NC @ 5Amps/220V AC
Memory	Settings and Ampere-Hours saved in solid state EEPROM
Lock	By rear jumper to prevent accidental tampering with shunt setting
Supply	48V DC 10% (Also available in 24V/96V/120V DC)
Size	Front Fascia 96mm x 96mm
Weight	800 grams

Programmable Ampere Hour Meter

Product Details:

Model code:805AH
Product Name:Programmable Ampere Hour Meter
Category:ampere_hour_meters
Sub Category:electroplating_applications

Specification

Display	4 Digit 7 Segment Red LED display for Ampere 1 Red LED to indicate status of Relay contacts 6 Red LEDs to for configuration settings
Shunt Calibration	Maximum 9999 Amps corresponding to 75mV settable from front panel
Set Limit	Settable from 0-9999
Resolution	1AH/1AM
Time Relay	Relay contact with time settings in Mins:Secs
Contact Rating	NO-P-NC @ 5Amps/220V AC
Memory	Settings and Ampere-Hours saved in solid state EEPROM
Lock	By rear jumper to prevent accidental tampering with shunt settings
Supply	220V AC 10% @ 50/60Hz
Size	Front Fascia 96mm x 99mm Depth 135mm. Cut Out : 91mm x 91mm.
Weight	800 grams

Programmable Ampere Hour Meter

Product Details:

We are a reputed manufacturer and trader of a huge gamut of Programmable Amp Hr Meter. Manufactured keeping in mind all the set quality norms of the industry, our range of meter is ideal for ensuring electroplating thickness by presetting AMP-HOUR. Also, our range of meter is widely useful for checking Amp-Hour of rechargeable batteries using voltage limit. Also, before the final dispatch., our range of Programmable Amp Hr Meter is well tested on different quality parameters by our quality experts.

Model code:803AH
Product Name:Programmable Amp Hr Meter
Category:ampere_hour_meters
Sub Category:battery_testing_application

Features

Separate displays for Voltage, Current and Amp-Hour
Programmable for AH/0.1AH/Amin/0.1AMin
Usable with any shunt by setting Calibration for Amp-75mV
Calibration factor lockable from rear
4 Digit Amp-Hour and 6 Digit cumulative Amp-Hour display
Attractive front panel membrane switches in rugged Aluminum cabinet
In case of power failure, the current status of selected parameters, the current Amp-Hour and Cumulative Amp-Hour is saved

Specification

Display :All of 0.56in character height Red 7 Segment displays
a.3 Digits to display voltage 0 99.9V
b.4 Digits to display current 0 999.9Amps
c.6 Digits to display Amp-Hour (4 Digit) and cumulative Amp-Hour (6 Digit)
Max. Shunt : Max. value of 999.9 Amps corresponding to 75mV. User programmable from front in CAL mode. (Max. value of 9999Amps also available on request)
Selection of Amp Hour/Min : Short Pin 17-18 for Amp-Hour
Open link of Pin 17-18 for Amp-Minute
0.1AH/Amin : Higher 0.1 resolution by shifting internal jumper by opening cover
Totaliser : 6 Digit readable in Total Mode
Limit Up to 9999 Ahr/Amin settable in limit mode using increment/decrement switches
Relay : NO-P-NC of 5 Amp at 220V AC contact rating
Start : Pressing front panel switch or momentarily shorting rear Pins 5 & 6 by wiring an external switch
Memory :Non-volatile EEPROM solid state memory
Stores programmed value of shunt, preset value, current Amp-Hr and the current
Cumulative Amp-Hr to preserve current status on power failure
Lock : Open Link between Pin 1 & 2 to Lock Cal i.e. shunt value
Low Voltage Stop Internally set at 10.5V for testing 12V battery. Short Pins 3 & 4 for this function
Supply : 220V AC 10% at 50/60Hz
Size : Vertical type with front panel 96 x 192 mm
Terminals : At rear with marking for wiring
Mounting : Panel Mounted
Fuse : At rear of 0.2Amps

Digital Ampere Hour Meter

Product Details:

We are counted among some of the most sought after manufacturers and traders of a wide gamut of Programmable Ampere Hour Meter. These are designed and manufactured as per all the set quality norms of the industry. Our offered meters are widely used to measure electricity usage in a home. Our range of Programmable Ampere Hour Meter is highly acclaimed for attributes such as their durability, corrosion resistance, high shock & impact resistance and low maintenance, and many more.

Model code:805AH

Product Name:Programmable Ampere Hour Meter

Category:ampere_hour_meters

Sub Category:electroplating_applications

Features

Shunt calibration programmable up to 9999 for 75mV
Ampere-Hour/Minute selectable
Ampere-Hour stored on power failure
Settable limit for Ampere-Hours
Time relay with on time settable in Mins:Secs
Rear calibration lock to prevent tampering with shunt settings
Aesthetically designed front panel with membrane switches

Specification

Display	4 Digit 7 Segment Red LED display for Charging Ampere Hours 4 Digit 7 Segment Red LED display for Ampere-Hours
Shunt Calibration	Maximum 9999 Amps corresponding to 75mV settable from front panel
Discharge Set Point	Settable from 0-9999
Resolution	1AH/0.1AH
Relay	In alarm mode for Discharge Ampere Hours
Contact Rating	NO-P-NC @ 5Amps/220V AC
Memory	Settings and Ampere-Hours saved in solid state EEPROM
Lock	By rear jumper to prevent accidental tampering with shunt setting
Supply	48V DC 10% (Also available in 24V/96V/120V DC)
Size	Front Fascia 96mm x 96mm
Weight	800 grams